A water heater is all it takes to experience the difference between peaceful living in the comfort of your home and a day filled with chaos and the frustration of not getting your hot showers. Your water heater plays a very important role in your daily life, but if it decides to throw tantrums, you know you can be stuck dealing with cold waters in the middle of winter!
To prevent this not-so-pleasant situation, all you need to do is be careful and detect your water heater’s cry for help.
In this blog post, we will help you identify the top signs that indicate you need water heater repair & installation.
No Hot Water
Let’s start with the obvious: you’re not getting any hot water. If you’re stepping into a shower expecting warmth and instead get a blast of cold water, something’s clearly not right. This could be due to a variety of water heater issues, such as a broken thermostat, faulty heating parts, or sediment buildup in the tank.
But don’t worry! You don’t have to suffer through cold showers or attempt to fix it yourself. R&A Plumbing is just a call away to get your water heater back on track.
Inconsistent Water Temperature
If your water temperature is unpredictable, going from hot to cold in seconds, it’s a clear sign your water heater needs desperate attention. These temperature swings can be caused by a dysfunctional thermostat, mineral buildup on the heating parts, or a broken dip tube.
Before you start thinking it’s normal for your shower to go from toasty to icy, remember that R&A Plumbing is just a call away to help your water heater restore consistent water temperature.
Strange Noises Coming from the Water Heater
Is your water heater suddenly making strange noises like popping, rumbling, or even hissing? These sounds are more than just annoying and can indicate serious underlying water heater issues. Rumbling often points to sediment buildup at the bottom of the tank, while hissing could mean a leak.
Instead of turning up the TV to drown out the noise, give R&A Plumbing a call. Our team of expert plumbers will diagnose the issue and make sure your water heater is running quietly again.
Discolored or Smelly Water
If your hot water comes out rusty, cloudy or smells metallic, it’s not really a good idea to ignore these signs. These signs could be due to corrosion inside the tank or a failing anode rod, which is designed to prevent rust. A rotten egg smell could mean bacterial growth inside the tank, especially if you have a well-water system.
Well, we don’t want you to put up with gross water! R&A Plumbing can fix the issue and restore your access to clean, fresh, and hot water.
Leaks Around the Water Heater
Water around the base of your water heater is a big red flag. Even a small leak can quickly turn into a huge problem, leading to water damage, mold growth, and even tank failure. Leaks can be caused by anything from loose connections to a corroded tank or a faulty temperature and pressure relief valve.
Worried? No need to panic! Just reach out to R&A Plumbing, and we’ll take care of the leak before it causes any serious damage.
Higher Energy Bills
Have you noticed your energy bills shooting up for no reason? A faulty water heater could be the culprit. When your water heater is struggling to heat water, it uses more energy, which shows up as higher costs on your utility bills. This increase in your bill could be due to sediment buildup, a failing heating element, or even a small leak.
But you don’t have to pay more for less! Let R&A Plumbing take a look at your water heater and get it running efficiently again.
Visible Rust or Corrosion
Examine your water heater for any visible signs of rust or corrosion, especially around the fittings and valves. Corrosion can mean your tank is deteriorating from the inside, which is a serious problem. While some exterior rust can be repaired, extensive corrosion calls for an immediate replacement.
It’s not a smart idea to wait until your water heater completely gives up. Contact R&A Plumbing today, and we’ll assess the situation and recommend the best course of action.
R&A Plumbing has got you covered for all your water heater installation and repair. We’re your trusted plumbing company in Mount Pleasant, Tennessee, offering professional plumbing services that keep your home comfortable and safe.
Whether you’re dealing with an old, inefficient water heater or need a brand-new installation, our team of licensed and experienced plumbers is ready to help. We offer a wide range of services, from tankless water heater repair and gas valve to burner assembly maintenance, tank flushing, thermal expansion tank installation, and more.
Don’t wait until small water heater issues turn into a big headache. Call R&A Plumbing today to schedule your water heater repair or installation service.
We’re here to keep your water hot, your energy bills low, and your home running smoothly.
